Kenwood P-WD250MRW 10 Inch Marine Subwoofer and Amplifier

Kenwood P-WD250MRW 10 Inch Marine Subwoofer and Amplifier Overview

• Package includes KFC-W250MRW marine subwoofer and KAC-201MR amplifier
• 200 watts maximum power output
• Dual 1.5-ohm voice coils
• Pearl mica polypropylene woofer with rubber surround
• Power handling: 50-200 watts RMS

Kenwood P-WD250MRW 10 Inch Marine Subwoofer and Amplifier Review

Can't beat the value with this set-up. It is louder than I anticipated, especially because it only has a 10 amp fuse!

I would recommend this over some Pyle, or Boss, or Pyramid, etc. set-up. Kenwood is a solid company and you don't need 2000 watts to have some nice bass.

This is the perfect amount of bass if you're using your deck (~25w X 4) amplifier and not using an external amplifier. Also, make sure to use your high pass filters on your regular speakers, it will make the sound quality MUCH better and get louder too!

I mounted this sub under a seat with about 1.8 cu. ft. worth of box space behind it, and it sounds nice. Vibrates the seat too LOL.

I did have an issue where the sub would thump weirdly sometimes. I disconnected one of the RCA inputs (you really only need 1) and it fixed it. I think its probably a problem with my deck, and not the amplifier.

Check Prices & Learn more for
 Kenwood P-WD250MRW 10 Inch Marine Subwoofer and Amplifier

Kenwood KAC-1502S 350 Watts 2 Channel Stereo / Bridgeable Car Amplifier

Kenwood KAC-1502S 350 Watts 2 Channel Stereo / Bridgeable Car Amplifier Overview

• 2-Channel Class A/B Car Amplifier // Max power output: 175 watts x 2 chan. // MOSFET switching power supply
• RMS Power Rating: 4 ohms: 60 watts x 2 chan. // 2 ohms: 75 watts x 2 chan. // Bridged, 4 ohms: 150 watts x 1 chan.
• LED power indicator // Speaker-level inputs // Short circuit, DC offset, overload, and thermal protection circuitry
• Cast aluminum heat sink design // RCA level inputs // Screw terminals // Fixed low-pass filter (80 Hz)
• CEA-2006 compliant amplifier // Frequency response: 5-50,000 Hz // Dimensio // ns: 8-7/8"W x 2-3/16"H x 7-1/16"D

Kenwood KAC-1502S 350 Watts 2 Channel Stereo / Bridgeable Car Amplifier Review

          Amp is light and seems cheaper than the old school style Kenwood amps I am accustomed to. So far it plays well and the output seems right. I have it bridged at 4 ohms and heat doesn't seem to be a problem. Provided this amp doesn't break in the next year or so (I've owned it a few weeks) it would appear to be some of the best bang for the buck in terms of amps.

Check Prices & Learn more for
 Kenwood KAC-1502S 350 Watts 2 Channel Stereo / Bridgeable Car Amplifier

Kenwood KAC-7204 1000 Watt Max Power Stereo Bridgeable Amplifier with Variable LPF/HPF

Kenwood KAC-7204 1000 Watt Max Power Stereo Bridgeable Amplifier with Variable LPF/HPF Overview

          Amazon.com Product Description Sound enthusiasts buy Kenwood amps for their superior quality, and the KAC-7204D is no exception. This compact 2-channel amplifier features a sturdy cast-aluminum chassis that is 30% smaller than last year's model and supplies 1000 Watts Max Power. Built-in high-pass and low-pass filters adjust the amplifier output so you'll get the best sound possible from your speakers and subs.

• Rated Power: 250 Watts x 2 (2 ohm); 500 Watts x 1 (4 Ohm Bridged)
• High-pass (12 dB per octave) and low-pass (24 dB per octave) filters variable from 50 to 200 Hz
• MOSFET power supply
• Speaker-level inputs with signal sensing turn-on
• One-year limited warranty

Kenwood KAC-7204 1000 Watt Max Power Stereo Bridgeable Amplifier with Variable LPF/HPF Review

          I had a Sony amp 1000 watt pushing two 12 inch Sony 1200 watt subs..it hit good but jus wasn't enough for me I was suppose to get the kac 7204 but I got a 7205? But it hits hard so I'm ok with it. it came pretty quick actually I installed it set it up and WOW this amp shakes every thing in my car! Doesn't get hot or anything the fans are a thumbs up the other day my wife played "she will" by lil wanye and drake my driver side mirror broke and fell off while I was driving!! The first note of bass on the song destroyed it! I recommend this amp to anyone who wants hard hitting bass. My friend also has this amp in his lowrider u can hear him coming before u can see him lol but over all bad mo fo amp! Also on my deck I have the subwoofer setting to -5 it doesn't even need to be higher than that..those 12 inch Sonys flex hard and hit hard knowing ppl who don't like Sony subs or the brand in car audio they freak when they find out I have Sony subs..

Check Prices & Learn more for
 Kenwood KAC-7204 1000 Watt Max Power Stereo Bridgeable Amplifier with Variable LPF/HPF

Kenwood Kfc-6993Ps Performance Series 5-Way 6" X 9" Coaxial Speakers System

Kenwood Kfc-6993Ps Performance Series 5-Way 6" X 9" Coaxial Speakers System Overview

          Kenwood Kfc-6993Ps 6" X 9" Performance Series 5-Way Speaker System

• 6" X 9" Coaxial Speakers
• 500W Max
• 120W Rms
• 4_ Imp
• Freq Resp: 66 Hz-22 Khz

Kenwood Kfc-6993Ps Performance Series 5-Way 6" X 9" Coaxial Speakers System Review

          Great Speakers, Fantastic Price. Very Satified with the Performance and the sound from does Speakers. At the present time I am Overhaulin a 1982 Corvette, Collectors Edition and was looking for a set of 6" x 9", 5 way Speakers and mounted them in the rear of my Vette in a custom speaker box I design and fabricated and they turn out Great.
Keep up the good work, Kenwood and Amazon. Thank you.

Check Prices & Learn more for
 Kenwood Kfc-6993Ps Performance Series 5-Way 6" X 9" Coaxial Speakers System

Kenwood Kac-8405 720-Watt 4/3/2-Channel Amplifier with Variable LPF/HPF

Kenwood Kac-8405 720-Watt 4/3/2-Channel Amplifier with Variable LPF/HPF Overview

          Kenwood Kac-8405 600-Watt, 4/3/2-Channel Amplifier With Variable Lpf/Hpf

• Compact 4/3/2-Channel Car Audio Amplifier
• 720W Max Power
• Cea Rated: 50W (1.0% Thd+N) @ 4_/4 Ch
• Cea Rated: 75W (1.0% Thd+N) @ 2_/4 Ch
• High-Quality Speaker Level Input & Blue Illumination

Kenwood Kac-8405 720-Watt 4/3/2-Channel Amplifier with Variable LPF/HPF Review

          This thing works really well for the price I paid for it. It took me awhile to adjust the amp to the speakers but when you get it right you will fall in love. It does not over heat and shut off or makes weird noises either which I liked. I have it hooked up to 4 kenwood speakers in a Dodge Magnum which thumps so nice. I don't use it for base for which I have a custom enclosure for but these work fine. Also, I barely heard the fans when they came on to which were only on for like 2 mins but I had this thing under the floor board covered up

Check Prices & Learn more for
 Kenwood Kac-8405 720-Watt 4/3/2-Channel Amplifier with Variable LPF/HPF

Kenwood Kac-8105D 1000W Max Power Class D Mono Car Audio Amplifier

Kenwood Kac-8105D 1000W Max Power Class D Mono Car Audio Amplifier Overview

          The Kenwood Kac-8105D 1000W Max Power Class D Mono Car Audio Amplifierhas a small foot print and a mighty powerful kick. Ready to pump out 1000 Watts Max Power, the KAC-8105D includes a built-in infrasonic filter. : 50W X 4

• Class D Mono Car Audio Amplifier
• 1000W Max Power
• 300 X 1 @ 4_
• 500 X 1 @ 2_
• Thermal Management System
• Speaker-level inputs with signal sensing turn-on
• Bass Boost Control
• Variable low-pass filter
• High quality speaker level input and blue illumination
• Preamp-level inputs and outputs

Kenwood Kac-8105D 1000W Max Power Class D Mono Car Audio Amplifier Review

          This amplifier delivers true, clean power to my 1100 watt 10" DVC Infinity Reference sub-woofer. You could run a 12" or 15" no problem with this thing (500 watts RMS). I have my sub wired in parallel to draw full power, yet this amp has vented ports on top that keep it running cool. The all-black design is very simple yet sleek, and the illuminated, horizontal blue strip and red LED are perfect accents. A black, brushed-metal face-plate hides all the wiring connection ports for a clean, professional finish.

Check Prices & Learn more for
 Kenwood Kac-8105D 1000W Max Power Class D Mono Car Audio Amplifier

Kenwood KDC248U In-Dash Head Unit Car Stereo

Kenwood KDC248U In-Dash Head Unit Car Stereo Overview

          Making it easy to connect, search, select and enjoy music from your iPod® or iPhone®. In addition the Kenwood KDC248U In-Dash Head Unit Car Stereo features a front auxiliary input that easily accepts the headphone output of a portable music player or smart-phone and a remote control. The Kenwood KDC248U In-Dash Head Unit Car Stereo is a great sounding receiver with multiple connectivity options all at a great price.

• Power Handling Peak: 50W X 4
• Power Handling RMS: 22W X 4
• Front USB Port Provides Direct Control Of IPod And IPhone
• CD/CD-R/CD-RW/MP3/AAC/WMA Playback

Kenwood KDC248U In-Dash Head Unit Car Stereo Review

          This is a great stereo; iPod functionality is great, and charges the iPod while plugged in. The AM/FM tuner is absolutely amazing (I now have around 10 more channels that I did not get with the stock stereo), and the bass boost really does a great job. The stereo's manual is well made/descriptive, and explains what every wire's job is on the included harness. I would definitely buy this product again!

Check Prices & Learn more for
 Kenwood KDC248U In-Dash Head Unit Car Stereo

PYLE-PRO PDMW5 - 5'' High Performance Mid-Bass Woofer

PYLE-PRO PDMW5 - 5'' High Performance Mid-Bass Woofer Overview

          100 Watts RMS/200 Watts Peak5'' Paper Coating Cone 1'' High Temperature Kapton Voice Coil 15 oz Magnet Structure Sensitivity: 90dB Frequency Response: 80Hz - 7kHz 8 Ohm Impedance Mounting Depth: 2''

• 100 Watts RMS / 200 Watts Peak Power Handling - 5'' Treated Paper Cone
• 1'' High Temperature Aluminum Voice Coil - 15 oz Magnet Structure
• Sensitivity: 90dB - Frequency Response: 80Hz ~ 7kHz
• Mounting Depth: 2''
• 8 Ohm Impedance

PYLE-PRO PDMW5 - 5'' High Performance Mid-Bass Woofer Review

          I used four of these as exact replacements for the low-range speaker that came in a Radio Shack enclosure. Over the years, the surround of the four original speakers had deteriorated. These sound great for their size.

Check Prices & Learn more for
 PYLE-PRO PDMW5 - 5'' High Performance Mid-Bass Woofer

Pyle PPA12 Professional Premium Pa Woofer

Pyle PPA12 Professional Premium Pa Woofer Overview

          Pyle has been in business for over 35 years, and their manufacturing experience and expertise is easy to see - and hear. Pyle Drivers are all manufactured with a close attention to detail, and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. Pyle Midrange / Tweeter Compression Drivers are second to none, and feature solid construction and accurate power handling ratings.

• Stamped steel baskets
• Strong black paper cone
• Cloth edge suspension
• Bumped and vented pole piece
• 8 ohms impedance

Pyle PPA12 Professional Premium Pa Woofer Review

          I purchased this woofer to go in the custom Sub cabinet that I built years ago. I have always enjoyed the sound of a sub for TV/Movies/Music and the old driver in the cabinet gave up the good fight from years of daily use. This woofer is great. I didn't realize how sloppy the old worn out woofer had become. This Pyle woofer sounds tight and has plenty of punch. I knew it was a winner when my kids came in from outside to inform me that they could "feel" the sound of what I was watching(I tested it with battle scenes from the Lord of the Rings trilogy). With a good cabinet and quality amp teaming up with this woofer, you can't go wrong.

Check Prices & Learn more for
 Pyle PPA12 Professional Premium Pa Woofer

Pyle PLBS12 500 Watt Bandpass System 12 Inch

Pyle PLBS12 500 Watt Bandpass System 12 Inch Overview

          Pyle bandpass subwoofers are specially designed for maximum slam! This woofer is mounted inside a dual-chambered box – one sealed, the other ported – with the sound waves emerging from the ported box. This yields a low, narrow frequency sound (25 Hz – 800 Hz) with a huge punch that’s super efficient. With ample room, these babies will roar. The 500-watt 12” subwoofer is designed a specially treated black rubber edge suspension, so the only vibrations you’ll be hearing will come from your music. The blue flame polypropylene cone provide maximum boost and extend the life of your product and ensure the safety of your vehicle. And this subwoofer doesn’t just sound great – it looks great, too, thanks to the blue LED lights. Feel the bass with Pyle’s bandpass subwoofers!

• One 12'' High Power 4 Ohm Subwoofers - Rear Vented Design
• Blue Flame Polypropylene Cone - 500 Watts Max Power Handling
• Specially Treated Black Rubber Edge Suspension - Dimensions: 15.6''W x 14.2''H x 14''D
• 2'' Aluminum Voice Coil
• Blue LED Lights

Check Prices & Learn more for
 Pyle PLBS12 500 Watt Bandpass System 12 Inch